Framing Begins

Andrew and I started framing today! It was soooo nice to actually see some materials standing. We had to wait a week longer than expected because of a mix up with our floor joists. I had two quotes on floor joists - we (me and the people at the store) thought they were both for engineered wood I-beams, which take about three days to get. Nope - they actually quoted on web trusses, which are more expensive and have about a three week lead time. We talked them down to two weeks and I think we'll make that time up when we start doing electrical, plumbing and HVAC. You can just feed all of your tubing, wires, etc. right through the webs without drilling holes. Way, way easier.

Here's a pic of me doing my best "Crowsnest Pass Quantum of Solace" impression a la Paslode impulse nailer. Cool tool. No air hoses or cords - just a small gas cylinder and a battery. You get about 1200 shots on one cylinder! Excuse the mess in the kitchen - we just moved in and we're doing a few renos.

We managed to get the sill plate on and we set up about 1/3 of the joists. If we can get the hangers (which the buggers didn't supply), we should be able to finish the floor tomorrow. We're so lucky - it's barely been below zero and it's supposed to be upwards of 14ยบ on Monday. Looks like the temperature takes a dive after that but fingers crossed.

Comments

Anonymous said…
Are you going to use that fancy nail gun to track down some car wreckers!?
November 29, 2008 at 9:56 PM
Brian said…
Or maybe some loggers.
December 5, 2008 at 5:47 PM
Post a Comment

Popular posts from this blog

Weather and Decks and Roofing

Image
The spring weather is always mixed here in the Pass. We had 12˚C one day and blizzards the next. We managed to get the front completely finished and even threw on the deck. Here you can see one of those places where mistakes have been made. Not buy us though - it was the truss company. One thing I learned through all of this is to not assume the engineer (?) at the truss company understands your drawings. There have been a few errors on their part now and we've just had to adapt as we go. Well... in all fairness, we probably could have corrected this if we caught it earlier. The pilings for the center post were in the right place and so is the foundation - no problem. When I went to put up the post, it was not centered under the gable. WTH? I checked my measurements, looked at the drawings and the everything seemed to check out. Then I measured the gable again. It turns out that if you take a close look at the drawings, the gables isn't centered over the doorway. It is centered...
Read more

Second Floor Well Underway

Image
It's amazing how fast we're moving along considering the wind and the weather. We have about 75% of the second floor framing done and now we're heading into a holding pattern because of materials. The guy that is cutting the big timbers had a problem with his forklift and so he hasn't worked for over a week now. In reality, we only need two of them to support the cantilevered corner of the spare room out front. You can see my fantastic, improvised support post right there in front. Maybe just don't walk on that part of the floor upstairs quite yet. This is a close-up of the west wall and one of my favorite details. It's just a cantilevered window and seat in the middle of the stairwell but it looks really great. There you will have a view of Turtle Mountain as you come up the stairs. We are also waiting for windows. Durabuilt simply won't give a delivery date until the order is done. It's amazing to me that a manufacturer has such little faith in their o...
Read more